choosing the right water heater for your home
, , ,

Choosing the Right Water Heater for Your Home

Having reliable hot water is an essential part of daily life, powering our showers, dishwashing, laundry, and more. However, choosing the right water heater for your home can be overwhelming, given the variety of options available. In this blog, we’ll explore the most common types of water heaters—gas, oil, electric, tankless coil, tankless high-efficiency water heaters, and hybrid water heaters to help you make an informed decision.

1. Gas Water Heaters

Gas water heaters are a popular choice due to their efficiency and reliability. These units use natural gas or propane to heat water and are available in both tank and tankless models.

What to Know:

  • Energy Efficiency: Gas water heaters heat water quickly and are often more energy-efficient than electric models.
  • Lower Operating Costs: Natural gas is typically cheaper than electricity, resulting in lower utility bills.
  • Fast Recovery Rate: They can replenish hot water faster than electric models, making them ideal for larger households.
  • Works During Power Outages: As long as the gas supply is intact, these units can operate without electricity.

2. Oil Water Heaters

Oil water heaters are less common but are a good option for homes in areas where oil heating is prevalent.

What to Know:

  • High Heating Capacity: Oil water heaters can quickly heat large amounts of water, making them suitable for high-demand households.
  • Durability: These units are built to last, often providing reliable service for years.
  • Excellent for Cold Climates: Oil-based systems are powerful and effective in regions with harsh winters.

3. Electric Water Heaters

Electric water heaters are widely used due to their simplicity and accessibility. They use electric heating elements to warm the water and are available in a range of sizes.

What to Know:

  • Lower Initial Cost: Electric water heaters tend to be less expensive to purchase and install.
  • Safety: These units don’t use combustible fuels, making them safer in homes without proper ventilation.
  • Ease of Installation: They can be installed almost anywhere, as they don’t require a gas line or exhaust venting.
  • Low Maintenance: Electric models often have fewer components that can fail, resulting in less maintenance.
  • Environmental friendliness: Electric water heaters don’t produce emissions and are better for the environment overall.

4. Tankless Coil Water Heaters

Tankless coil water heaters are integrated with a home’s boiler, using the heat from the boiler to warm the water as it’s needed. A tankless coil water heater provides hot water on demand without a tank.

What to Know:

  • Energy Efficiency: Since these units don’t store water, they eliminate standby heat loss, making them more efficient.
  • Space-Saving Design: Without a storage tank, these heaters take up minimal space.
  • On-Demand Heating: They provide hot water only when needed, which is ideal for households with intermittent hot water usage.

5. Tankless High-Efficiency Water Heaters

Tankless high-efficiency water heaters, also known as on-demand water heaters, are a modern solution for energy-conscious homeowners. Tankless water heaters heat water instantaneously without the use of a storage tank. Cold water flows through a heat exchanger in the unit, and either a natural gas burner or an electric element heats the water.

What to Know:

  • Exceptional Energy Savings: These units only heat water as it’s used, reducing energy consumption significantly.
  • Compact Design: Without a tank, these units are small and can be mounted on walls, freeing up floor space.
  • Unlimited Hot Water: As long as the water flow rate matches the unit’s capacity, you’ll never run out of hot water.
  • Longer Lifespan: With proper maintenance, tankless water heaters can last up to 20 years or more.
  • Environmentally friendly: Heat pump water heaters produce fewer greenhouse gas emissions than traditional gas water heaters. As they don’t generate heat, they don’t produce gas leaks or toxic emissions.

 6.Hybrid Water Heaters

Also known as heat pump water heaters, a hybrid water heater is a fusion of tankless and traditional tank water heating technologies. It features a reservoir to store water, but it doesn’t run constantly. Instead, these heaters operate by extracting heat from the surrounding air and using it to warm up the stored water.

What to Know:

  • Energy Efficiency: Hybrid water heaters are more efficient than traditional water heaters, which can reduce energy costs.
  • Environmental Impact: Hybrid water heaters have energy-efficient compressors that can lower your home’s carbon footprint.
  • Initial Cost: Hybrid water heaters are more expensive than traditional water heaters, typically costing around $1,750 or more.
  • Maintenance: Hybrid water heaters require extra maintenance, such as changing air filters.

Choosing the Right Water Heater for Your Home

When selecting a water heater, consider the following factors:

  • Household Size: Larger families may require a unit with a higher capacity or faster recovery time.
  • Energy Source Availability: Determine whether your home is equipped for gas, oil, or electric water heating.
  • Initial Cost vs. Long-Term Savings: While some units have a higher upfront cost, they may offer significant savings in energy bills over time.
  • Space Constraints: Compact units like tankless water heaters are great for smaller homes or apartments.
  • Environmental Impact: High-efficiency and tankless models are ideal for reducing your carbon footprint.

When choosing the right water heater for your home, choose a water heating system that provides enough hot water for your family and is also energy efficient to save you money. By understanding the features of each type of water heater, you can choose the best option to meet your household’s needs, budget, and energy preferences. Whether you prioritize energy efficiency, cost-effectiveness, or convenience, there’s a water heater designed for you.

When conducting an inspection CMS Home Inspection will note what type of water heater you have and provide with helpful maintenance tips. We will also look for signs of corrosion at pipe connections and general wear and tear so we can alert you to if it’s time to replace your present hot water system.

/0 Comments/by
Start the New Year With a Fresh Look at Your Home
, , ,

Start the New Year With a Fresh Look at Your Home

The beginning of a new year is more than just a time for personal resolutions; it’s also a great opportunity to reassess the condition of your home and start the new year with a fresh look at your home. After the hustle and bustle of the holiday season, things tend to slow down, making it easier to focus on home maintenance tasks that might have been overlooked throughout the year.

A home inspection at the start of the year allows you to address small issues before they become big problems. Whether it’s checking your HVAC system, inspecting your roof, or testing your home’s water quality, taking proactive steps can save you time, money, and stress in the long run. Let’s take a closer look at why you’d want to start the new year with a fresh look at your home.

Why Periodic Home Inspections Are Essential

Your home is one of the largest investments you’ll ever make, and like any investment, it requires consistent care and attention. Periodic inspections help you:

  • Identify Issues Early: Catching problems early can prevent costly repairs later.
  • Ensure Safety: Systems like plumbing, heating, and electrical wiring need to be functioning properly to avoid accidents.
  • Improve Energy Efficiency: An inspection can highlight areas where energy is being wasted, helping reduce utility bills.
  • Increase Home Value: A well-maintained home retains its value better over time.

Key Areas to Inspect

While a professional home inspection is always a good idea, there are several areas you can check on your own to ensure everything is in good working order.

1. HVAC Systems

Your heating, ventilation, and air conditioning system works hard throughout the year. Start the new year by changing your filters, inspecting ducts for leaks, and ensuring the thermostat is functioning correctly.

2. Plumbing

Leaks, drips, and water pressure issues are common plumbing problems. Check under sinks, around toilets, and in basements or crawl spaces for signs of moisture or water damage.

3. Roof and Gutters

Inspect your roof for missing shingles or damage caused by winter weather. Clean out gutters to prevent blockages that could cause water damage to your home’s exterior and foundation.

4. Windows and Doors

Drafty windows and doors can significantly impact your home’s energy efficiency. Check seals, caulking, and weather stripping, and replace them if needed.

5. Electrical Systems

Loose outlets, flickering lights, and frequently tripped circuit breakers are all signs of potential electrical issues. If you’re not comfortable inspecting these yourself, consider hiring a licensed electrician.

Declutter and Refresh Your Living Space

Beyond system checks, when you start the new year with a fresh look at your home it can have significant mental and emotional benefits. Decluttering your space, reorganizing rooms, and adding fresh decor can make your home feel brand new.

Decluttering Tips:

  • Donate items you no longer use.
  • Create designated storage areas for frequently used items.
  • Take it one room at a time to avoid feeling overwhelmed.

Small Upgrades That Make a Big Impact:

  • A fresh coat of paint.
  • New light fixtures.
  • Updated cabinet hardware.

Create a Home Maintenance Calendar

One of the best ways to stay on top of home maintenance is to create a calendar for regular check-ups. Include seasonal tasks like servicing your HVAC system in the spring and fall, gutter cleaning before the rainy season, and checking smoke detectors every six months.

Having a clear schedule ensures nothing falls through the cracks, and it spreads out maintenance tasks throughout the year, making them more manageable.

When to Call in the Professionals

While DIY inspections and repairs are great for smaller tasks, there are certain areas where professional expertise is essential. Consider hiring professionals for:

  • Annual HVAC inspections
  • Roof assessments
  • Water quality testing
  • Electrical repairs

These professionals have the experience and tools to identify hidden issues and provide solutions before they escalate.

Final Thoughts About Starting the New Year with a Fresh Look at Your Home

Your home is more than just a structure; it’s where your family creates memories, feels safe, and finds comfort. When you start the new year with a fresh look at your home you’re making an investment in your family’s well-being and your property’s value.

Take the time this year to inspect, repair, and refresh your space. Whether you handle tasks yourself or hire professionals like CMS Home Inspection, you’ll enjoy peace of mind knowing your home is in great shape for the year ahead.

Make 2025 the year you prioritize your home’s health and functionality. A little effort now can go a long way toward creating a safe, efficient, and beautiful living environment for you and your loved ones. Let’s connect if you want to schedule a home inspection.

/0 Comments/by
common inspection issues with crawl spaces
, , , ,

Common Inspection Issues With Crawl Spaces

Crawl spaces are a critical yet often overlooked part of a home’s structure. As the foundation’s buffer zone, they are crucial in maintaining structural integrity, indoor air quality, and energy efficiency. However, crawl spaces are frequently prone to a host of issues that can lead to significant problems if not addressed. Here, we discuss some of the most common inspection issues with crawl spaces and why they matter.

Dirt Floors Without Vapor Barriers

One of the most common inspection issues with crawl spaces is the absence of a vapor barrier over dirt floors. A vapor barrier is a thick sheet of plastic or similar material designed to cover the ground, preventing moisture from seeping into the crawl space. Without it, moisture from the soil can evaporate into the air, raising humidity levels and creating the perfect environment for mold and mildew growth.

High humidity in the crawl space doesn’t just stay confined to that area. Moist air can seep into the living spaces above, contributing to poor indoor air quality and potential health issues for occupants. Moreover, increased humidity can accelerate wood rot and structural damage, particularly to wooden joists and beams.

Vented Crawl Spaces

Traditionally, crawl spaces were designed with vents to allow air circulation. The idea was that ventilation would help prevent moisture buildup. However, in practice, vented crawl spaces often cause more harm than good.

During humid months, warm outdoor air enters through the vents and cools when it comes into contact with the crawl space’s surfaces. This cooling process leads to condensation, which increases the moisture content in the crawl space. Over time, this excess moisture can lead to mold growth, wood rot, and pest infestations. Additionally, during colder months, vents allow cold air into the space, making floors above colder and reducing overall energy efficiency.

Standing Water and Drainage Issues

Standing water in a crawl space is a red flag for inspectors. This issue often arises from poor drainage around the home, such as clogged gutters, downspouts that discharge water too close to the foundation, or improper grading that directs water toward the house.

Water pooling in the crawl space not only exacerbates humidity and mold problems but can also attract pests such as termites, ants, and rodents. If left unaddressed, standing water can erode the foundation’s stability and lead to costly structural repairs.

Insufficient or Damaged Insulation

Insulation in crawl spaces is essential for maintaining energy efficiency and protecting against temperature extremes. Unfortunately, many crawl spaces either lack adequate insulation or have damaged insulation due to moisture, pests, or age.

When insulation becomes wet, it loses its effectiveness and may even promote mold growth. Fiberglass insulation, often used in crawl spaces, can sag or fall out over time, leaving gaps that allow heat transfer and increase energy bills. Proper encapsulation and the use of rigid foam insulation or spray foam can help mitigate these issues.

Mold and Mildew Growth

Crawl spaces are particularly susceptible to mold and mildew due to their dark, damp, and often poorly ventilated conditions. Mold growth not only damages structural components but also poses significant health risks to occupants, especially those with allergies or respiratory conditions.

During inspections, visible mold or a musty odor is often a clear indication of a moisture problem in the crawl space. Addressing this issue involves identifying and eliminating the source of moisture, as well as cleaning and remediating existing mold.

Pest Infestations

The dark and damp environment of a crawl space can attract various pests, including rodents, insects, and termites. These pests can cause extensive damage to insulation, wiring, and wood components. For instance, termites are notorious for eating through wooden structures, which can compromise the home’s integrity.

Inspectors often look for signs of pest infestations, such as droppings, nests, or damaged materials. A proactive approach to sealing entry points and maintaining a dry environment can help deter pests from taking up residence in the crawl space.

Structural Damage

Structural damage in crawl spaces is a serious issue that often goes unnoticed until it becomes severe. Problems like sagging or cracked beams, rotting joists, or failing support columns can significantly compromise the stability of the home.

This type of damage is frequently caused by prolonged exposure to moisture, pest activity, or the natural settling of the foundation. Regular inspections and timely repairs are crucial to ensuring the long-term safety and stability of the structure.

Electrical and Plumbing Hazards

Crawl spaces often house important utilities such as electrical wiring, plumbing pipes, and HVAC ductwork. Unfortunately, these systems are vulnerable to damage in the crawl space environment. Moisture can corrode metal pipes and electrical components, leading to leaks, shorts, or even fire hazards.

Inspectors should pay close attention to the condition of utilities within the crawl space. Any signs of rust, fraying wires, or leaks should be addressed immediately to prevent further issues.

Poor Access and Maintenance

Many crawl spaces have limited or difficult access, making it challenging to inspect and maintain them. Over time, this lack of accessibility can result in overlooked problems that worsen and become more expensive to fix.

Homeowners should ensure that their crawl space has a proper access point and is inspected regularly, even if there are no obvious signs of trouble. Routine maintenance, such as clearing debris and monitoring moisture levels, can prevent small issues from becoming major concerns.

Addressing Common Inspection Issues With Crawl Spaces

Addressing crawl space problems often involves a combination of preventive measures and professional remediation:

  • Install a Vapor Barrier: Cover dirt floors with a high-quality vapor barrier to reduce moisture infiltration.
  • Encapsulate the Crawl Space: Seal vents, walls, and floors with insulation and vapor barriers to create a controlled environment.
  • Improve Drainage: Ensure proper grading around the home, clean gutters, and extend downspouts to direct water away from the foundation.
  • Dehumidify: Use a dehumidifier designed for crawl spaces to control humidity levels.
  • Conduct Regular Inspections: Schedule periodic inspections to identify and address potential problems early.

By taking these steps, homeowners can protect their crawl spaces from common issues, ensuring a healthier and more stable home environment. Whether you’re buying a home or maintaining your current one, paying attention to the crawl space can save you significant time, money, and headaches in the long run. Let’s connect if you’re due for a periodic inspection.

/0 Comments/by
the difference between heat pumps, furnaces, and boilers
, , , ,

The Difference Between Heat Pumps, Furnaces, and Boilers

As winter approaches, it’s essential to understand the heating systems available to keep your home warm and comfortable. With so many options on the market, deciding between heat pumps, furnaces, or boilers can be overwhelming. These systems all have their own benefits and drawbacks, and each is better suited to different climates, home types, and preferences. In this blog, we’ll break down the difference between heat pumps, furnaces, and boilers so you can make an informed decision about what will work best for your home.

Heat Pumps: The All-in-One Solution

Heat pumps are highly versatile heating and cooling systems that both heat and cool your home. They work by transferring heat rather than generating it directly. In the winter, heat pumps extract heat from the outside air and bring it indoors to warm your home. In the summer, the process is reversed, and the heat pump acts like an air conditioner by removing heat from inside your home and releasing it outside.

One of the primary benefits of heat pumps is their energy efficiency. Because they don’t generate heat through combustion (like a furnace), they can provide up to three times more heating energy than the electrical energy they consume. This makes them an environmentally friendly choice that can significantly reduce your energy bills. However, heat pumps can struggle in frigid temperatures because they rely on external air to extract heat. In regions with harsh winters, a backup heating system might be necessary.

Heat pumps are generally quieter than furnaces and boilers and offer year-round comfort. The upfront cost of a heat pump system can be higher than other heating options, but it often pays off in the long term through lower operating costs. Additionally, since heat pumps can be used for both heating and cooling, they eliminate the need for separate systems, saving on installation and maintenance costs.

Furnaces: The Most Common Heating System

Furnaces are one of the most common heating systems in homes across the U.S. They work by blowing heated air through ducts to warm the interior of the house. Furnaces can run on various energy sources, including natural gas, propane, oil, or electricity. Gas-powered furnaces are the most popular due to their efficiency and relatively low operating costs, but electric furnaces are also available in homes that don’t have access to gas.

Furnaces work by burning fuel to create heat. The heat is then distributed throughout your home by a blower fan that circulates the heated air. The heated air is pushed through ducts and released into your living spaces through vents.

One of the major advantages of furnaces is their ability to quickly heat a home, even in very cold conditions. This makes them an excellent choice for colder climates, as they can maintain consistent temperatures even in sub-zero conditions. However, furnaces require a ductwork system, and their efficiency depends on the condition of the ducts. Leaky or poorly insulated ducts can lead to energy loss and higher heating costs.

Gas furnaces are generally more energy-efficient than oil ones, with electric furnaces generally being the most expensive to operate. One downside to furnaces is that they can create uneven heating in some parts of the house, especially if the ductwork is poorly designed. They also produce dry air, which can make the indoor environment feel less comfortable, especially during the dry winter months.

Boilers: Radiant Heat for Consistent Comfort

Boilers are heating systems that use hot water or steam to heat your home. The system works by heating water in a central boiler unit which is circulated through pipes and radiators or underfloor heating systems. The heat is released into the room, warming the air and objects in the space through radiant heat. Unlike forced-air systems, like furnaces, which heat the air directly, boilers rely on the transfer of heat to the surrounding surfaces.

One of the key benefits of a boiler system is the consistent, comfortable warmth it provides. Since hot water or steam is circulated through pipes and radiators, the heat is evenly distributed across your home. There are no issues with drafts or cold spots, and the heating tends to be more even throughout the day. Additionally, because a boiler doesn’t use air to transfer heat, it doesn’t dry out the air, making it a good option for people with respiratory issues or allergies.

Boilers are also very efficient, especially if you have a modern condensing boiler that can capture and reuse heat that would otherwise be lost. Because they don’t rely on ductwork, boilers are ideal for homes that don’t have space for vents or for those who prefer a quieter heating option. Boilers tend to be more expensive to install initially, especially if you don’t already have a system in place. The cost of installation and maintenance can be higher than furnaces or heat pumps, but the long-term benefits can make up for it, especially in colder climates.

Which System Is Right for You?

Choosing between heat pumps, furnaces, and boilers depends on several factors, including climate, budget, and personal preference.

  • Heat Pumps are best suited for mild to moderate climates, where they can efficiently heat and cool your home year-round. They’re great for those who want an eco-friendly, energy-efficient system that can handle heating and cooling needs in one unit.
  • Furnaces are ideal for colder climates and homes that need rapid heat. If you live in an area with extreme winter conditions, a furnace may be the most reliable and effective option. Gas-powered furnaces tend to offer the best combination of efficiency and affordability.
  • Boilers are a great option if you want consistent, radiant heat and have the space for a system of pipes and radiators. They’re excellent for homeowners who want a comfortable, energy-efficient solution with less dry air and more even heating.

In conclusion, each heating system has its advantages and drawbacks. By considering your climate, home size, and preferences, you can choose the right system that will keep you warm and comfortable throughout the winter months. One thing you can do to protect your heating system investment is to periodically inspect it to make sure that it’s working properly and, in the case of a furnace make sure the ducts are clear and not leaky.

CMS Home Inspection is always ready to come inspect your heating system. It’s wise to periodically inspect your whole house so that, as a homeowner, you’ll be able to stay on top of your home’s maintenance.

/0 Comments/by
Low-slope-and-flat-roofs
, , ,

Common Issues Found with Low-Slope and Flat Roofs

Low-slope and flat roofs are commonly found on commercial buildings and some residential homes. They provide a sleek, modern look and are often considered more cost-effective due to their simpler design. However, low-slope or flat roofing systems come with challenges that can lead to significant issues if not properly addressed. While these roofs have benefits, understanding the common issues with low-slope and flat roofs can help property owners make informed decisions and take preventative measures.

1. Poor Drainage

One of the biggest challenges with low-slope and flat roofs is drainage. Unlike pitched roofs, which naturally allow water to run off, flat roofs don’t have the same ability to shed water quickly. This means that rain, snow, and ice can accumulate on the surface, leading to ponding water. When water pools on a flat roof, it can add unnecessary weight, and over time, this can weaken the structure of the building and the roof itself. If left unattended, ponding water can also lead to leaks, water damage, and the growth of mold and algae, which can further deteriorate roofing materials.

To prevent poor drainage, it’s important to have a well-designed drainage system in place, which may include strategically placed drains, scuppers, and gutters. Regular maintenance, such as clearing debris from these drains and gutters, is also crucial to ensure they remain functional.

2. Membrane Damage

Most low-slope and flat roofs rely on a roofing membrane to keep water out. These membranes, whether made of materials like EPDM (Ethylene Propylene Diene Monomer), TPO (Thermoplastic Olefin), or PVC (Polyvinyl Chloride), are highly effective but also prone to damage. Membrane punctures can occur due to foot traffic, falling debris, or the installation of heavy equipment, such as HVAC units. Even small punctures can allow water to seep in, potentially leading to leaks and water damage over time.

Another common issue with membranes is seam separation. These roofing membranes are often installed in large sheets, and the seams between these sheets can weaken or pull apart due to expansion and contraction caused by temperature changes. If the seams are not properly adhered or maintained, water can find its way in, causing leaks.

Routine inspections and proper installation is the key to preventing these issues. Property owners should ensure that foot traffic on the roof is limited to necessary personnel and that any installation of equipment on the roof is done with care.

3. Thermal Expansion and Contraction

Low-slope and flat roofs are particularly susceptible to the effects of thermal expansion and contraction. As temperatures fluctuate throughout the day and seasons, roofing materials expand and contract. Over time, this constant movement can cause cracks in the roofing material, particularly at seams or around penetrations, such as vents and chimneys. These cracks can allow water to infiltrate the roof, leading to leaks and further damage.

To minimize the effects of thermal expansion and contraction, it’s important to use high-quality, flexible roofing materials that can withstand these movements. Additionally, installing a reflective or cool roof coating can help reduce temperature fluctuations by reflecting sunlight and reducing heat absorption.

4. Alligatoring

Alligatoring refers to the cracking pattern that can develop on a flat roof’s surface, resembling the skin of an alligator. This occurs when the roof’s surface becomes brittle over time, often due to prolonged exposure to UV rays, temperature changes, and aging of the material. Alligatoring can compromise the roof’s waterproofing abilities, leading to leaks and other issues.

Preventing alligatoring requires regular inspections and maintenance. Property owners should ensure that their roofing materials are installed correctly, with no trapped air or moisture. Applying protective coatings can also help extend the life of the roof and prevent UV damage.

5. Flashing Issues

Flashing is a critical component of any roofing system, including low-slope and flat roofs. Flashing refers to the material used to seal areas where the roof meets vertical surfaces, such as walls or chimneys, or around penetrations like vents and skylights. If flashing is improperly installed or becomes damaged over time, it can allow water to seep into the building.

On flat roofs, flashing issues are particularly common due to the minimal slope and the constant exposure to water. Over time, flashing can corrode, crack, or separate from the roof surface, compromising the roof’s ability to keep water out.

To avoid flashing issues, regular inspections and maintenance are essential. Damaged or corroded flashing should be repaired or replaced promptly to prevent leaks and further damage.

6. Using Sloped Roof Material

Using sloped roof materials like asphalt shingles on a flat roof can lead to several critical issues such as water pooling, premature deterioration, leakage risk, and inadequate sealing. Because flat roofs have minimal or no slope the effective shedding of water and snow is impeded.

Using inappropriate materials for flat roofs not only compromises the roof’s integrity but also increases maintenance and repair costs due to frequent water damage. Flat roofs require specialized materials such as modified bitumen, EPDM, or TPO, which offer better protection and drainage capabilities in these conditions.

7. Limited Lifespan

While low-slope and flat roofs can be more cost-effective upfront, they generally have a shorter lifespan compared to pitched roofs. The constant exposure to standing water, UV rays, and extreme weather conditions can cause roofing materials to deteriorate faster. Even with proper maintenance, flat roofs may need to be replaced more frequently than their pitched counterparts.

Property owners should consider the long-term costs of flat and low-slope roofing systems when making decisions about roof installations or replacements. Investing in high-quality materials and regular maintenance can help extend the lifespan of the roof, but it’s important to be aware of the potential for more frequent repairs and replacements.

Conclusion

Low-slope and flat roofs offer many benefits, but they also come with specific challenges. Common issues such as poor drainage, membrane damage, thermal expansion, blistering, alligatoring, flashing problems, and a limited lifespan can all impact the performance and longevity of the roof.

Regular inspections, proper installation, and timely maintenance are essential to minimizing these issues and ensuring that flat roofs provide long-term protection for the building. By understanding these potential problems, property owners can take proactive steps to keep their low-slope and flat roofing systems in good condition and avoid costly repairs.

Let’s connect to schedule your inspection.

/0 Comments/by
common issues found with grounds around your home
, , , , ,

Common Issues Found With Grounds Around Your Home

Maintaining a home goes beyond the walls and roof; it extends to the grounds surrounding it. The landscape plays a crucial role in protecting your property from various environmental factors and ensuring the longevity of your home. However, there are common issues found with grounds around your home that can arise and may lead to serious problems if left unaddressed.

Here, we will explore some common issues found with grounds around your home, including insufficient grading, negative grading, vegetation contacting the home, trees in contact with service wires, and missing window wells for basement windows at grade.

Insufficient Grading

One of the most critical aspects of a home’s exterior is the grading of the land. It’s also one of the most common issues found with grounds around your home. Proper grading directs water away from the foundation, reducing the risk of water intrusion and structural damage. Insufficient grading occurs when the slope is too flat or not sloped correctly, allowing water to pool near the foundation. This stagnation can lead to flooding in basements, mold growth, and soil erosion around the foundation, ultimately threatening the stability of the home.

To remedy insufficient grading, homeowners can regrade the soil to create a slope that directs water away from the house. This can involve adding soil to create a berm or leveling out areas that have become uneven over time. Regular inspection of the grading, particularly after heavy rains, can help identify and rectify issues early.

Negative Grading

Even worse than insufficient grading is negative grading, where the ground slopes toward the home instead of away from it. This condition is even more hazardous than insufficient grading because it actively encourages water to flow toward the foundation. Negative grading can lead to severe water intrusion issues, promoting mold growth and weakening the foundation’s integrity.

Addressing negative grading requires a more involved process. Homeowners may need to excavate soil from around the foundation and redistribute it to create a positive slope. Installing drainage systems, such as French drains, can also help manage excess water and prevent it from pooling around the foundation.

Vegetation Contacting the Home

While landscaping can enhance a home’s curb appeal, it can also pose risks if not managed correctly. Vegetation that contacts the home, such as shrubs, vines, and trees, can trap moisture against the siding, leading to rot, mold, and pest infestations. Additionally, roots from nearby trees can undermine the foundation, causing structural issues over time.

To mitigate these risks, it’s essential to maintain a proper distance between plants and the home’s exterior. Homeowners should regularly prune and trim vegetation to prevent contact with the house. It’s also wise to choose landscaping plants less likely to cause damage, opting for species with shallow root systems and minimal moisture retention.

Trees in Contact with Service Wires

Trees can add beauty and shade to a property, but they can also create hazards when their branches come into contact with overhead service wires. This situation can lead to power outages, interference with cable lines, and even pose fire risks if branches cause arcing in electrical lines. Moreover, strong winds can exacerbate the risk of falling branches, leading to costly repairs and safety concerns.

Regular tree maintenance is essential to prevent these issues. Homeowners should trim trees and monitor their growth to ensure they remain a safe distance from service wires. If tree branches are too close for comfort, consulting a professional arborist may be necessary to evaluate the situation and provide appropriate solutions.

Missing Window Wells with Basement Windows at Grade

For homes with basements, window wells are vital for ensuring proper drainage and preventing water from entering the basement through window openings. Missing or improperly maintained window wells can lead to significant issues, especially in areas with basement windows at or below grade level. Without adequate wells, rainwater can pool around the windows, leading to leaks, mold, and water damage.

To address this issue, homeowners should install window wells that are deep enough to divert water away from the basement windows. It’s also essential to regularly check and clear any debris from the wells to ensure they function correctly. Installing grates can help keep leaves and other materials out while allowing water to drain properly.

Conclusion

Maintaining the grounds around your home is as crucial as caring for its interior. Addressing common issues such as insufficient grading, negative grading, vegetation contacting the home, trees in contact with service wires, and missing window wells can save homeowners from costly repairs and protect their investments.

Regular inspections and proactive maintenance can help identify and rectify these problems before they escalate into more severe issues. By taking the time to care for the exterior of your home, you can create a safe and attractive environment that stands the test of time. As a homeowner, you can rest assured that as part of our inspection routine, we will find any of the common issues found with grounds around your home and make recommendations on how to address them.

Click here to schedule an inspection and enjoy the peace of mind of knowing that we’ll find what you need to know.

/0 Comments/by
Attic ventilation
, , , ,

The Importance of Attic Ventilation and Common Issues

Attic ventilation is a crucial aspect of maintaining a healthy, energy-efficient, and long-lasting home. Proper attic ventilation helps regulate temperature, control moisture, and prevent structural damage. Despite its importance, many homeowners overlook or misunderstand the necessity of attic ventilation, leading to various issues that can compromise the integrity and comfort of their homes.

In this blog I’ll explain why attic ventilation is imperative and what some of the common issues are that I find as an inspector.

The Importance of Attic Ventilation

  1. Temperature Regulation: Attic ventilation plays a significant role in regulating the temperature of a home. During hot summer months, the temperature in an unventilated attic can soar to over 150 degrees Fahrenheit. This extreme heat can transfer to the living spaces below, making it difficult and expensive to keep the home cool. Proper ventilation allows hot air to escape, reducing the burden on air conditioning systems and lowering energy bills.
  2. Moisture Control: Moisture is a home’s worst enemy. In colder months, warm air from living spaces can rise into the attic, where it condenses on the colder surfaces. This condensation can lead to mold growth, wood rot, and insulation damage. Effective ventilation helps to expel moist air, reducing the risk of condensation and the associated problems.
  3. Extending Roof Life: Excessive heat and moisture in the attic can accelerate the deterioration of roofing materials. Shingles can warp, crack, or blister, leading to leaks and costly repairs. By ensuring a well-ventilated attic, homeowners can extend the life of their roofs and avoid premature replacements.
  4. Improving Indoor Air Quality: Poor ventilation can trap pollutants, allergens, and odors inside the home. Well-ventilated attics help improve overall indoor air quality by allowing stale air to escape and fresh air to circulate. This is particularly important for households with members who suffer from allergies or respiratory issues.
  5. Preventing Ice Dams: In cold climates, inadequate attic ventilation can lead to the formation of ice dams. Warm air escaping into the attic can cause snow on the roof to melt, which then refreezes at the roof’s edge, creating ice dams. These dams can damage shingles, gutters, and cause water to back up into the home. Proper ventilation helps maintain a consistent roof temperature, preventing the conditions that lead to ice dams.

Common Issues with Attic Ventilation

Despite its importance, many homes suffer from inadequate or improperly installed attic ventilation. Here are some common issues:

  1. Insufficient Ventilation: Many homes simply do not have enough vents to provide adequate airflow. A balanced system has both intake (soffit) and exhaust (ridge or gable) vents. Insufficient ventilation can lead to the buildup of heat and moisture, causing the problems mentioned above.
  2. Blocked Vents: Over time, vents can become blocked by debris, insulation, or even nesting animals. Blocked vents hinder airflow, reducing the effectiveness of the ventilation system. Regular inspections and maintenance are necessary to ensure that vents remain clear and functional.
  3. Improper Vent Placement: For ventilation to work effectively, there needs to be a proper balance between intake and exhaust vents. Intake vents should be located at the soffits to allow cool air to enter, and exhaust vents should be at the roof ridge or gables to allow warm air to escape. Improper placement can disrupt airflow, rendering the system ineffective.
  4. Inadequate Insulation: While insulation and ventilation serve different purposes, they work together to regulate temperature and moisture. Poor insulation can cause heat to escape from the living spaces into the attic, exacerbating temperature and moisture issues. Ensuring proper insulation levels can enhance the effectiveness of attic ventilation.
  5. Neglecting Maintenance: Many homeowners install attic ventilation and then forget about it. However, like any other part of the home, attic ventilation requires regular maintenance. Vents should be inspected at least once a year for blockages, damage, and proper operation. Addressing issues promptly can prevent minor problems from becoming major repairs.
  6. Improper Installation: Ventilation systems must be installed correctly to function as intended. Poor installation can lead to leaks, ineffective airflow, and reduced performance. Hiring a qualified professional to install and inspect attic ventilation can ensure that it meets building codes and operates efficiently.

Conclusion

Attic ventilation is a vital component of home maintenance that significantly impacts energy efficiency, structural integrity, and indoor air quality. Proper ventilation helps regulate temperature, control moisture, extend roof life, improve air quality, and prevent ice dams.

However, common issues such as insufficient ventilation, blocked vents, improper vent placement, inadequate insulation, neglect, and improper installation can compromise its effectiveness. Homeowners must recognize the importance of attic ventilation and take proactive steps to ensure their systems are functioning optimally. Regular inspections, maintenance, and professional installation are vital to reaping the full benefits of attic ventilation.

At CMS Home Inspection, we have years of experience and understand the concerns regarding owning a home in Rhode Island, Massachusetts, and eastern Connecticut. Our thorough home inspections provide the tools necessary for you to understand the structure behind any property, as well as any repairs that may be necessary. A quality inspection report can mean the difference between owning your dream home and buying a house that falls short.

/0 Comments/by
The Hazards of Solid Aluminum Wiring to Electrical Systems
, , ,

The Hazards of Solid Aluminum Wiring to Electrical Systems

When it comes to residential and commercial electrical systems, the type of wiring used is a critical consideration. Among the various materials available, aluminum wiring has gained a notorious reputation over the years, particularly solid aluminum wiring. While it was once a popular choice due to its cost-effectiveness and conductivity, the hazards of solid aluminum wiring to electrical systems have become more apparent, leading to a significant decline in its usage.

In this blog, we will explore the hazards of solid aluminum wiring to electrical systems and why it is crucial to address these issues to ensure the safety of electrical systems.

A Brief History

Aluminum wiring was introduced in the 1960s as a cheaper alternative to copper wiring. During a time of rising copper prices, aluminum presented a cost-effective solution for electrical installations in homes and buildings. Initially, the use of aluminum wiring seemed promising due to its good conductivity and lower cost. However, over time, it became evident that aluminum wiring, especially solid aluminum wiring, posed serious safety risks that were not initially anticipated.

The Problem with Aluminum Wiring

One of the primary issues with aluminum wiring is its tendency to oxidize and corrode more readily than copper. When aluminum wiring oxidizes, it forms a non-conductive layer that can increase electrical resistance, leading to overheating. This overheating can, in turn, cause the insulation around the wire to degrade, increasing the risk of electrical fires. Additionally, aluminum has a higher coefficient of thermal expansion compared to copper, meaning it expands and contracts more with temperature changes. This can cause the connections to loosen over time, further exacerbating the risk of overheating and electrical failures.

Fire Hazards

The combination of increased oxidation, higher electrical resistance, and mechanical weakness makes solid aluminum wiring a significant fire hazard. Electrical arcing, caused by loose connections or broken strands, generates intense heat that can easily ignite surrounding materials. According to the U.S. Consumer Product Safety Commission (CPSC), homes with aluminum wiring are 55 times more likely to experience fire hazards than those with copper wiring.

Identifying and Mitigating the Risks

If you suspect that your home or building contains solid aluminum wiring, it is crucial to take immediate action to mitigate the hazards of solid aluminum wiring to electrical systems. Here are some steps to consider:

  • Professional Inspection: Hire a licensed inspector to go through your electrical system. They can identify the presence of aluminum wiring and assess its condition.
  • Connection Upgrades: If aluminum wiring is found, consider upgrading the connections. Special connectors, such as those rated for aluminum-to-copper connections, can help mitigate the risks by ensuring secure and stable connections.
  • Rewiring: In cases where the aluminum wiring is extensive or in poor condition, rewiring with copper may be the safest option. While this can be costly, it significantly reduces the risk of electrical fires and other hazards.
  • Regular Maintenance: Regular maintenance and inspections are essential to ensure the continued safety of your electrical system. Periodic checks can identify potential issues before they become serious problems.

Conclusion

The hazards of solid aluminum wiring to electrical systems cannot be overstated. While it was once seen as a cost-effective alternative to copper, the long-term risks associated with its use far outweigh the initial savings. The increased susceptibility to oxidation, higher electrical resistance, and mechanical weakness make solid aluminum wiring a significant fire hazard.

If your property has aluminum wiring, it is essential to take proactive measures to ensure the safety of your electrical system. You can mitigate these risks by conducting professional inspections, upgrading connections, or even rewiring with copper to protect your home or building from potential disasters. Prioritizing electrical safety is not just about compliance; it is about safeguarding lives and property from preventable hazards.

/0 Comments/by
what to look for when choosing a home inspector
, , , ,

What to Look For When Choosing a Home Inspector

Purchasing a home is one of the most significant investments most people will make in their lifetime. To ensure you’re making a well-informed decision, it’s essential to have a thorough home inspection before finalizing the purchase. A skilled home inspector can uncover potential issues that could cost you a lot in the long run. Here’s what to look for when choosing a home inspector to safeguard your investment.

Certifications and Training

First and foremost, the home inspector you choose should have the proper certifications and license. In many regions, home inspectors are required to be licensed, but the qualifications can vary significantly. Look for inspectors who have undergone rigorous training and have certifications from reputable organizations such as the American Society of Home Inspectors (ASHI) or the International Association of Certified Home Inspectors (InterNACHI). These certifications are a testament to the inspector’s commitment to their profession and their expertise.

Experience and Expertise

Experience counts when choosing a home inspector. An experienced home inspector has seen a wide range of issues and knows how to look beyond the surface. Ask about their experience, particularly in homes similar to the one you’re considering. Some inspectors might have a background in a specific area, such as plumbing, roofing, or electrical work, which could provide additional insights into potential problems.

Scope of Inspection

Understanding what the inspection covers is crucial. A standard home inspection should include a review of the home’s structure, exterior, roofing, plumbing, electrical system, heating and cooling systems, interior, insulation, and ventilation.

A thorough inspection of a typical single-family home should take several hours. An inspector who is fast may miss important items. The goal of an inspection is to be as thorough as possible, not as fast as possible.

Sample Reports

Ask for a sample inspection report to gauge the inspector’s thoroughness and reporting style. A good report should be detailed, include photographs, and provide a clear explanation of each issue, along with its potential impact. It should be understandable to someone without technical knowledge and help you make an informed decision about the property. Also, ask how long the report takes to be ready. Some inspectors may take 24 to 48 hours, while at CMS Home Inspection all reports are delivered the same day, often within half an hour of a completed inspection.

Professionalism and Communication

The ability to communicate effectively is an invaluable trait in a home inspector. Choose an inspector who is willing to discuss their findings in detail and answer your questions promptly and comprehensively. A professional inspector should be punctual, courteous, and willing to explain complex issues in layman’s terms.  After the inspection, they should provide a timely report that clearly outlines any concerns.

Insurance

Ensure that your home inspector carries professional liability insurance, also known as errors and omissions (E&O) insurance. This protects you in case the inspector misses a significant issue during the inspection.

Reviews and Referrals

Word-of-mouth recommendations and online reviews can provide valuable insights into an inspector’s reputation. Look for reviews that mention the inspector’s thoroughness, professionalism, and ability to communicate. You can also ask the inspector for references from past clients.

Cost

While cost shouldn’t be the sole determining factor, it’s still important to consider. The cheapest option might not always be the best when it comes to home inspections. You’re looking for value, which combines thoroughness, expertise, and reliability.

When trying to choose an inspector it’s important to clarify if there are additional costs for services beyond the standard inspection, such as radon testing, termite inspection, mold sampling, septic inspection, and well water testing. To make an informed decision get quotes from several inspectors and understand what’s included in their fees.

Availability and Engagement

A good inspector should be available to conduct the inspection within your contractual timeline and be willing to have you accompany them during the inspection. This allows you to see the issues firsthand and gain valuable insights about your potential home.

Conclusion About Choosing a Home Inspector

Choosing a home inspector is a crucial step in the home-buying process. It’s not just about finding problems; it’s about gaining a comprehensive understanding of the property you’re about to invest in. By focusing on certifications, experience, scope, reporting, professionalism, insurance, reputation, cost, and engagement, you can select an inspector who will provide the insights you need to make a confident and informed decision.

Remember, the goal of a home inspection is not to give a pass or fail grade to a home but to provide you with a deeper understanding of the property’s condition, allowing you to plan for future maintenance and repairs.

If you need a home inspection in Rhode Island, central and southeastern Massachusetts, or eastern Connecticut we should connect.

/0 Comments/by

Make an Informed Decision for Your Future

Schedule Online

Contact Us

Phone: 401-830-0966
Email: info@cmshomeinspection.com

Serving Rhode Island and Surrounding Areas

CMS Home Inspection provides inspections throughout all of Rhode Island, Bristol, Plymouth, Norfolk, and Worcester areas of Massachusetts, and Eastern Connecticut.

Licensed Inspector

RI License #44163

MA License #1111

CT License #HOI.0001081

NACHI #19091235

Radon Testing Business Lic # RTB00124

Radon Analytical Service CRM Lic # CRM00051

Radon Inspector Lic # RI00199

Rhode Island Septic Inspector # 092002.